Designers-lookbook_01

Dimensions: All dimensions are measured in millimetres and are approximate. Please note, as part of our policy of continual improvement, we reserve the right to make modifications at any time.

W: Overall width including glassware or shade as illustrate, except where stated ‘not including.

P: Overall projection of a bracket including glassware or shade as illustrated, except where stated ‘not including.

Ø: Overall diameter including glassware or shade as illustrated, except where stated ‘not including. shades

width

diameter

projection

max height H: Height, the overall measurement from top to bottom (including glassware or shade as illustrated) where a product is not adjustable. H max: Maximum height, the overall measurement from the top of the ceiling fixing, including the maximum amount of chain or cable, to the

NB: Fittings are supplied to accommodate the maximum height and can be shortened on site prior to installation. They should not be shortened to less than the given minimum height as installation of certain fittings too close to a surface can cause discolouration of the surface finish.

lowest point of the fitting (including glassware or shade as illustrated).

H Min: Minimum height, the overall measurement from the top of the ceiling fixing to the lowest point of the fitting including the minimum amount of chain or cable and glassware or shade as illustrated.

min height

Frank l i te des i gners lookbook 01 | 5 7