Franklite Catalogue 26 & Supplement 2

Using the catalogue

Now that tungsten lamps have been discontinued, we have listed the major ity of products in this catalogue with a lamp base and maximum LED wattage. The exceptions to this are G9 and low voltage lamps fittings which are still available as a halogen option.

Our ‘suitable for low ceilings’ logo can be found throughout the

As always, customer satisfaction and safety are our main priorities and all our fittings are subject to stringent quality controls. Each item is individually tested to ensure compliance with the latest requirements and all safety procedures are regular ly reviewed and improved. The maximum safe wattage and lamp type are listed for every product within this catalogue.

catalogue and denotes that the fitting is ࠂ 6cm or less in height.

All luminaires are supplied for normal use. Any extraordinary usage or situation should be advised prior to placing an order.

Dimensions All dimensions are approximate and, as part of our policy of con tinual improvement, we reserve the right to make modifications at any time. Diameter ( Ø ): Overall diameter including glassware or lampshade as illustrated (except where stated ‘not including shades’). Height: The overall measurement from top to bottom where a product is not adjustable. Min. Height: The overall measurement from the top of the ceiling fixing to the lowest point of the fitting including the minimum amount of chain or cable. NB: Fittings are supplied to accommodate the maximum height and can be shortened on site prior to installation. They should not be shortened to less than the given minimum height as installation of certain fittings too close to a surface can cause discolouration of the surface finish. Max. Height: The overall measurement from the top of the ceiling fixing, including the maximum amount of chain or cable, to the lowest point of the fitting. Projection: Overall projection of a bracket including glassware or shade as illustrated (except where stated ‘not including shades’). Width: Overall width including glassware or shade as illustrated (except where stated ‘not including shades’). LED Lifetime All our dedicated LED products are manufactured using the most suitable components for the application for which they are intended and are built for longevity vastly reducing the need for lamp maintenance in domestic and commercial applications. For full details of our LED warranties, see the Legal Matters page on our website : www.Franklite.co.uk

Emergency Lighting

Various luminaires can be supplied with integral 3 hour maintained emergency gear. The appropriate model numbers are shown with next to the standard code. Other units may be supplied with remote emergency gear where required provided the fitting is suitable.

Lighting on flammable surfaces

All light fittings develop heat when working, some more than others. Light fittings are marked according to their suitability for different mounting surfaces. Under BS EN6߿598- ࠁ:ࠀ ߿ ࠀ 5 the following symbols are used when luminaires are not suitable for mounting in certain applications: Not suitable for covering with thermal insulation Not suitable for mounting in a normally flammable surface Not suitable for mounting on a normally flammable surface

Symbols explained

Double insulated fitting (requires no earth

LED options available

Emergency options available

Dimmable options available

Integral lighting control options available

Fittings are manufactured in brass with the exception of the chain which, for strength, is made of steel.

If you require further information, please call our customer service department.

307